Flying Coldsaw Cutoff Machine
Flying Coldsaw Cutoff Machine
Tube Mill for Carbon Steel
Tube Mill For Carbon Steel
Parth Equipment provides Tube Mill For Carbon Steel In Ahmedabad. Get in touch for more information
| Features | ||||||||||
 |
Tube mills for Various grades of Carbon Steel & Mild Steel | |||||||||
|
Section Forming Mills For Ferrous & Non-Ferrous Metals. As per Customer Requirement | |||||||||
|
|
|||||||||
|
Cross key ways for permanent alignment of forming & sizing stands on the base frames | |||||||||
|
Shafts from alloy steel, duly heat treated, ground, hard-chrome plated & ground again | |||||||||
|
Idler Roll stand assembly designed for vertical height adjustment while the mill is in operation | |||||||||
|
Screw down movement of Turk’s head rolls by a link-pin mechanism for ease in reforming thick-walled sections | |||||||||
|
W-forming system in Roll design for better edge-forming & freedom from wrinkle while forming sites with adverse t/D ratio | |||||||||
|
Continuous Feeding Coil Accumulator For Uninterrupted Rolling During Coil Joining |
| TUBE MILL FOR S.S. TUBES |
| Model Name | Tube Size Range* | Tube Thickness | ||
| Min O.D. | Max O.D. | Min. | Max. | |
| PARTH 25 TM-S | 6 | 20 | 0.6 | 2.0 |
| PARTH 40 TM-S | 9 | 32 | 0.7 | 2.8 |
| PARTH 50 TM-S | 12 | 42 | 0.8 | 3.2 |
| PARTH 65 TM-S | 15 | 51 | 1.0 | 4.0 |
| PARTH 90 TM-S | 20 | 76 | 1.2 | 4.5 |
| PARTH 9 0TM | 20 | 90 | 1.2 | 4.0 |
| PARTH 115 TM-S | 25 | 90 | 1.6 | 5.4 |
| PARTH 115 TM | 25 | 115 | 1.6 | 4.8 |
| PARTH 140 TM-S | 32 | 115 | 2.0 | 6.0 |
| PARTH 140 TM | 32 | 141 | 2.0 | 5.4 |
| PARTH 170 TM-S | 60 | 168 | 2.5 | 5.5 |
| PARTH 220 TM | 75 | 219 | 2.5 | 7.7 |
| PARTH 270 TM | 90 | 273 | 3.0 | 9.0 |
Rolls for Tube Mill
Rolls for Tube Mill In Ahmedabad
Parth Equipment provides Rolls for Tube Mill In Ahmedabad. Get in touch for more information.
 |
|
| Tube End Chamfering Machine | |||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||
Pilger Mill Dies and Mandrels
Pilger Mill Dies and Mandrels In Ahemdabad
Parth Equipment provides Pilger Mill Dies and Mandrels In Ahemdabad. Get in touch for more information.
Rotary Hammering Action Type Swaging Machine |
|
|
Low-cost machine with high productivity |
|
Most suitable for small diameter tubes |
|
No end loss as the swaged end is prepared through series of hammer stocks |
|
2 Jaw type & 4 Jaw type arrangement for various diameter tubes |
Tube End Chamfering Machine |
||||||||||||||||||||||||||||||||||||||||||||
|
||||||||||||||||||||||||||||||||||||||||||||
Pipe Polishing Machine
Pipe Polishing Machine In Ahmedabad
Parth Equipment provides Pipe Polishing Machine In Ahemdabad. Get in touch for more information.
|
|
| Tube End Chamfering Machine | |||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||
Tube Swaging Machine
Parth Equipment provides Tube Swaging Machine In Ahmedabad. Get in touch for more information.
Rotary Hammering Action Type Swaging Machine |
|
|
Low-cost machine with high productivity |
|
Most suitable for small diameter tubes |
|
No end loss as a swaged end is prepared through series of hammer stocks |
|
2 Jaw type & 4 Jaw type arrangement for various diameter tubes |
Tube Swaging Machine |
||||||||||||||||||||||||||||||||||||||||||||
|
||||||||||||||||||||||||||||||||||||||||||||
Eccentric Roller Type Swaging Machine |
|
|
Two single piece rolls having various eccentric groves to create appropriate swaged ends |
|
Duly heat treated and ground rolls from High Carbon High Chromium (HCHC) |
|
Each pair of rolls is accurately machined and mated to from prefect evolute profile |
|
Quick swaging action yielding high productivity |
Tube Swaging Machine |
||||||||||||||||||||||||||||
|
||||||||||||||||||||||||||||
Cut to Length Line
Tube-End Chamfering Machine
|
Tube-End Chamfering Machine In AhemdabadParth Equipment provides Tube-End Chamfering Machine In Ahemdabad. Get in touch for more information.
|
| Tube End Facing Machine | |||||||||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||||||||
Tube Straightening Machine
|
Tube Straightening Machine For Ferrous & Non-Ferrous Metals. | |||||||||
|
Over 100 installations in India & abroad | |||||||||
|
|
|||||||||
|
3 x 3 skew roll design to achieve 1 in 1500 straightness | |||||||||
|
5 x 5 skew roll design to achieve 1 in 3500 straightness | |||||||||
|
M.S. Fabricated & duly stress relieved top & bottom mainframes | |||||||||
|
All the guiding holes in mainframes for roll brackets & supporting columns machined in a single setting | |||||||||
|
Single piece integrated roll bracket design | |||||||||
|
Rolls supported on two matched pair taper roller bearings on each side | |||||||||
Straightening machine for tube in coil form |
||||||||||
|
Double Plane (X-Y) Type Straightening Machine For 4 mm to 25 mm Tube OD | |||||||||
|
Centrifugal Action Type Straightening Machine For Capillary Tubes & Up to 12.7mm Tube OD | |||||||||
Tube Straightening Machine |
|||
| Model Name | Tube Size Range* | Tube Thickness | |
| Min O.D. | Max O.D. | Max. | |
| PARTH 15 ST | 4 | 16 | 2.5 |
| PARTH 25 ST | 6 | 25 | 3.2 |
| PARTH 25 ST-E | 6 | 32 | 2.4 |
| PARTH 40 ST | 8 | 40 | 4.0 |
| PARTH 40 ST-E | 8 | 51 | 3.2 |
| PARTH 50 ST | 10 | 51 | 5.0 |
| PARTH 50 ST-E | 10 | 65 | 4.0 |
| PARTH 75 ST | 15 | 76 | 6.0 |
| PARTH 75 ST-E | 15 | 90 | 4.5 |
| PARTH 90 ST | 20 | 90 | 8.0 |
| PARTH 90 ST-E | 20 | 115 | 6.0 |
| PARTH 115 ST | 25 | 115 | 10.0 |
| PARTH 11 5 ST-E | 25 | 141 | 7.0 |
| PARTH 170 ST | 50 | 168 | 12.0 |
| PARTH 170 ST-E | 50 | 219 | 8.0 |
| PARTH 220 ST | 60 | 219 | 20.0 |
| PARTH 220 ST-E | 60 | 273 | 14.0 |
